Sky Infinity NC - How to pair, connect and lock the Earbuds to the transmitter again?

If your Infinity NC earbuds and Relay transmitter fail to reconnect, please follow these steps to reconnect and lock them again.

Step1. Get the earbuds into pairing mode

Press & hold the pairing button on the inside of the case until the LED indicators on one earbud start flashing red & blue alternately, indicating that they are now in pairing mode. Take that pair of earbuds out of the case. 

Step 2. Get the transmitter Relay into pairing mode

Slide the Relay's switch to the "ON" position. For first time use, the Relay will enter PAIRING mode automatically. For subsequent use, put your Relay into PAIRING mode by pressing & holding the MFB until the LED flashes RED & BLUE alternately.

Step 3. Keep them within distance, wait for them to connect

Once connected, the LED indicator on Relay will be solid blue.

Step 4. Lock the transitter and earbuds.

Press the MFB button & V+ button on Relay for 5 seconds, until the LED indicator be solid red for 1 second and then be solid blue.

Now that they're locked together, they should automatically connect to each other the next time you use them. No need to pair them each time!

Repeat the above steps to pair and lock the second pair of earbuds.