To connect the headphones to the audio device, follow these steps:
Step 1: Turn on the headset. On the first use, the headset will enter pairing mode automatically. Otherwise, with the headset turned on, slide and hold the power switch to the "PAIR" position, release when you hear "Pairing" and see the LED flashing RED & BLUE.
Step 2: Turn on the Bluetooth on your device and select "Avantalk" from the Bluetooth menu.
Step 3: Keep the two devices close together. Once connected successfully, the headset's LED will become solid blue. You will hear a "Connected" voice indicator.
For subsequent use, your headset should automatically reconnect to the last paired device within a few seconds after turning on. If not, you can manually reconnect by sliding the power switch to "PAIR" once or by selecting "Avantalk" from your device's Bluetooth menu.